PLEXIGLAS® SHEET ASSEMBLY METHODS:
THROUGH-FASTENING
Drill holes larger than the fastener, allowing at least 1/16" more per running foot of Plexiglas® sheet. Holes should be located at least the diameter of the hole size from the edge of the sheet. Smoothing the hole surface with a round file should provide maximum breakage resistance. Tighten the screw just snugly and back off a 1/4 of a turn to provide free expansion or contraction movement of the Plexiglas® sheet. Do not use counter-sunk holes for flush mounting, but use a counter-bored hole.
The statements, technical information and recommendations obtained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained herein should be construed as an inducement to infringe any patent, and the user is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.
See MSDS for Health and Safety Considerations.
© 2006 Arkema